FREEDOM WON
SKU:
CA$3,873.00
CA$3,391.00 - CA$10,650.00
per item
This is a legacy page that contains out of date information. Please browse our current FREEDOM WON kits.
Sold Out
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
What's the difference between flat plate and evacuated tube collectors?
The difference is mostly cosmetic. Historically, evacuated tube collectors were able to reach higher temperatures, especially in cold climates, however modern high-performance flat plate collectors are able to reach temperatures close to those that evacuated tubes can reach. Evacuated tube collectors are less affected by the tilt of the collector but flat plate collectors are less noticeable.
How many collectors do I need?
On average, each collector provides enough thermal energy to heat the domestic hot water for two people. Space heating, hydronic heating, or pool heating will require additional panels.
How much space do I need for the collectors?
The length of an array is static, however the height and width of an array depends on the angle that the collectors are mounted. See the charts below for the length and width ranges for evacuated tube collectors and flat plate collectors.
Evacuated Tube Array
|
Flat Plate Array
* Base plate is 1.80 m (5' 11")
|
|
All our FREEDOM WON kits include the following:
|
Flat plate kits include the following:
|
Evacuated tube kits include the following:
|
|
Optional extras include:
|
|
Viessmann Flat Plate Collector
Gross area: 2.51 m² (27.0 ft²) Absorber area: 2.32 m² (25.0 ft²) Aperture area*: 2.33 m² (25.1 ft²) Spacing between collectors: 21 mm (3/4") Dimensions (W × H × D)**: 1056 × 2380 × 90 mm (41.75" × 93.75" × 3.5") Optical efficiency***: 82.3 % Heat loss coefficient U1: 4.421 W/(m²K) Heat loss coefficient U2: 0.0220 W/(m²K²) Thermal capacity: 4.89 kJ/(m²K) Weight (dry): 39 kg (86 lb) Fluid capacity (heat transfer medium): 1.83 L (0.48 US gal) Maximum working pressure****: 600 kPa (87 psi) Maximum stagnation temperature*****: 145 °C (293 °F) Connection: 22 mm (0.75") Requirements for installation surface & anchorage: roof construction with adequate load capacity for prevailing wind forces Maximum mechanical test positive load: 3500 Pa (73.1 lb/ft²) Maximum mechanical test negative load: 3000 Pa (62.7 lb/ft²) * Important for system design considerations ** Dimensions rounded to the nearest 1/4 inch *** Based on absorber area **** In sealed systems, operating pressure of at least 44 psi + 0.45 psi × static head (ft) (3.0 bar + 0.1 bar × static head (m) must be present in the collectors in cold conditions) ***** The stagnation temperature is the temperature which applies to the hottest point of the collector at a global radiation intensity of 1,000 W (3,412 BTU/hr) when no heat is conducted by the heat transfer medium |
Evacuated Tube Collector
Absorber area: 4.901 m² Aperture area: 2.791 m² Maximum operating pressure: 1,000 kPa Standard operating pressure: 600 kPa FrUL coefficient: 1.529 W/m²/°C Temperature coefficient for FrUL: 0.0166 W/m²/°C Average energy efficiency: 73.4 % Ambient temperature: -40 °C to 60 °C Fluid volume: 2.3 L Weight (dry): 106 kg Loading quantity (20/40/40HQ): 62/124/155 Outer material: aluminum alloy Insulation: PUF rock wool Copper pipe thickness: 1 mm Nipple size: 1" Condenser diameter: 24 mm Package size: 2.68 × 0.15 × 0.3 m |
Evacuated Tube
Radius: 58 mm Length: 1,800 mm Package size (10 tube carton): 1920 × 330 × 170 mm |
|
FREEDOM WON Expansion Tank & Air Vent
Construction materials:
Diameter:
Factory pre-charge: 12 psi Maximum working temperature: 116 °C (240 °F) |
FREEDOM WON Heat Dissipator
Length: 2438 mm Finish: natural Dissipation: 321.58 kJ / m (1,000 BTU / ft) |
FREEDOM WON PV Panel
PV panel:
|
|
FREEDOM WON Pump Station
Motor design: electronically commutated spherical motor with permanent magnet rotor / impeller Voltage: 8 - 25 V Power consumption: 3 - 55 W Current draw: 0.13 - 2.1 A Acceptable media: domestic hot water, water-glycol mixtures Maximum system pressure: 275.79 kPa (40 psi) Maximum system temperature: -10°C to 95°C (14 °F to 203 °F) Weight: 5.17 kg (11.4 lb) |
Concentrated Glycol
Freezing point*: -31.0 °C (-23.8 °F) Boiling point*: 110.6 °C (231.0 °F) * 50 % glycol, 50% water mixture |
Plumbing Hardware
Elastomeric insulation:
|
|
Optional External Heat Exchanger
Heat transfer rate: 15825.84 kJ (15,000 BTU) |
Delivery or Pickup
We are pleased to offer you both pickup or delivery options for your purchase. Pickup is from our store in Calgary, AB. In stock items will be ready for pickup in 2 to 3 business days. Once your order is ready for pickup you will be contacted via email.
Delivery is available for customers throughout Canada. Please contact us if your delivery address is outside Canada. Delivery costs are item and location dependent and can be viewed at checkout. In stock items will be shipped in 2 to 3 business days. Customers in Canada can typically expect their orders within 3 to 7 business days. Please contact us if you need a rush order. Complete solar kits are shipped via our preferred freight forwarder company and where possible we will schedule residential tailgate delivery (curbside). Once your order has been shipped you will be contacted via email and a tracking number will be provided.
Returns
We want you to be 100% satisfied with your purchase. If you are not satisfied, then you can ship it back to us for a refund. Find out more.
Warranty
We take great pride in the quality of the products we manufacture and sell, however we realize that defects do happen, therefore we offer a limited 1-year warranty to our customers. Find out more.
We are pleased to offer you both pickup or delivery options for your purchase. Pickup is from our store in Calgary, AB. In stock items will be ready for pickup in 2 to 3 business days. Once your order is ready for pickup you will be contacted via email.
Delivery is available for customers throughout Canada. Please contact us if your delivery address is outside Canada. Delivery costs are item and location dependent and can be viewed at checkout. In stock items will be shipped in 2 to 3 business days. Customers in Canada can typically expect their orders within 3 to 7 business days. Please contact us if you need a rush order. Complete solar kits are shipped via our preferred freight forwarder company and where possible we will schedule residential tailgate delivery (curbside). Once your order has been shipped you will be contacted via email and a tracking number will be provided.
Returns
We want you to be 100% satisfied with your purchase. If you are not satisfied, then you can ship it back to us for a refund. Find out more.
Warranty
We take great pride in the quality of the products we manufacture and sell, however we realize that defects do happen, therefore we offer a limited 1-year warranty to our customers. Find out more.
